| C&O L-2 | 
|---|
| %252C_Chesapeake_%2526_Ohio_(C%2526O)_300.jpg) | 
|  | 
| | Specifications | 
|---|
 | Configuration: 
 |  | 
|---|
 | • Whyte | 4-6-4 | 
|---|
 | • UIC | 2′C2′ h2 | 
|---|
 | Gauge | 4 ft 8+1⁄2 in (1,435 mm) standard gauge | 
|---|
 | Driver dia. | 78 in (1.981 m) | 
|---|
 | Length | 108 ft 0 in (32.92 m) | 
|---|
 | Adhesive weight | 217,500 lb (98,700 kg; 98.7 t) | 
|---|
 | Loco weight | 439,500 lb (199,400 kg; 199.4 t) | 
|---|
 | Total weight | 832,500 lb (377,600 kg; 377.6 t) | 
|---|
 | Fuel type | Coal | 
|---|
 | Fuel capacity | 60,000 lb (27,000 kg; 27 t) | 
|---|
 | Water cap. | 21,000 US gallons (79,000 L; 17,000 imp gal) | 
|---|
 | Firebox: |  | 
|---|
 | • Grate area | 90 sq ft (8.4 m2) | 
|---|
 | Boiler pressure | 255 psi (1.76 MPa) | 
|---|
 | Heating surface | 4,233 sq ft (393.3 m2) | 
|---|
 | Superheater: 
 |  | 
|---|
 | • Heating area | 1,810 sq ft (168.2 m2) | 
|---|
 | Cylinders | Two | 
|---|
 | Cylinder size | 25 in × 30 in (635 mm × 762 mm) | 
|---|
 | 
|  | 
 | C&O L-2-A | 
|---|
| | Type and origin | 
|---|
 | Only differences from L-2 above are shown |  | Power type | Steam | 
|---|
 | Builder | Baldwin Locomotive Works | 
|---|
 | Build date | 1948 | 
|---|
 | Total produced | 5 | 
|---|
 | 
| | Specifications | 
|---|
 | Driver dia. | 78 in (1.981 m) | 
|---|
 | Length | 108 ft 0 in (32.92 m) | 
|---|
 | Adhesive weight | 219,500 lb (99,600 kg; 99.6 t) | 
|---|
 | Loco weight | 443,000 lb (201,000 kg; 201 t) | 
|---|
 | Total weight | 836,000 lb (379,000 kg; 379 t) | 
|---|
 | 
|  | 
 The Chesapeake and Ohio Railway's class L-2 comprised eight coal-fired 4-6-4 "Hudson" type steam locomotives numbered 300–307 and built by the Baldwin Locomotive Works of Philadelphia, Pennsylvania in 1941. They had roller bearings on all axles, and the first-built, No. 300, also had roller bearings on its side and main rods. No. 300 bore "Elephant ear" smoke deflectors from 1948. 
In 1947, the C&O ordered five additional and very similar locomotives, numbering them 310–314; these were class L-2-A and differed mostly in using Franklin RC poppet valves instead of the Baker valve gear of the L-2s. These were the last express passenger steam locomotives ordered by a United States railroad, and some of the most expensive at $353,346 each, 80% more than the cost of the 8 earlier L-2 locomotives.[1] 
Both classes were among the largest 4-6-4s ever built, and they were even more powerful than the C&O's L-1 class. The heaviest were the C&O's L2a class at 443,000 lbs,[1] They were intended to work the C&O's top-flight express trains on level ground; the railroad purchased 4-8-4 "Greenbrier" types for mountain service. 
By 1953, C&O passenger services were wholly dieselized, and there was no more work for these locomotives to do. Hudson locomotives were very unsuited to freight work, with such a comparatively small proportion of their weight on the drivers. All the L2’s and L2a’s were quickly scrapped by 1953. 
 References
  Notes
 - ^  Huddleston, Eugene L. (Jan–Feb 2002). "The outstanding features and many lives of C&O 614". Chesapeake and Ohio Historical Magazine. Archived from the original on 2006-06-21. Retrieved 2006-01-11.